MIL-PRF-52343D
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified
as follows:
a. First article inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2 First article inspection. When a first article inspection is required, it shall be performed
on one complete unit. The inspection shall include the examination 4.4.
4.3 Conformance inspection. Conformance inspection shall include the examination 4.4.
4.4 Examination. Each repair kit shall be physically examined for compliance with the
requirements specified in table II. Any redesign or modification to comply with specified
requirements shall receive particular attention for adequacy and suitability. This element of
inspection shall encompass all examinations of performance, safety, human engineering, and
dimensional requirements. Non-compliance with any specified requirement, or the presence of
one or more defects shall constitute cause for rejection.
TABLE II. Examination.
Requirement
Number
Examination Description
Paragraph
101
Repair kit components not as specified.
TABLE I
102
Storage chest not as specified.
3.8
103
Marking not as specified.
3.9
104
Identification not as specified.
3.9.1
105
Materials not as specified.
3.10
106
Deterioration prevention and control not as specified.
3.10.1
107
Dissimilar metals not protected against galvanic corrosion as specified.
3.10.1.1
108
Used, rebuilt or re-manufactured parts used.
3.10.2
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in
the contract or order (see 6.2). When actual packaging of material is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain
packaging requirements. Packaging requirements are maintained by the Inventory Control Point's
packaging activity within the Military Department or Defense Agency, or within the Military
Department's System Command. Packaging data retrieval is available from the managing Military
Department or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business